Over 5,000 5 STAR REVIEWS ★★★★★

 877-33-HOYER
+1 877 33 HOYER

How to Use the Hoyer Elevate Sit-to-Stand Lift Safely

How to Use the Hoyer Elevate Sit-to-Stand Lift Safely

 

The Elevate is an active lift. Correct setup of the kneepad, foot tray, and powered base improves both safety and patient participation.

Preparation Checklist

  • Charge the batteries

  • Adjust the kneepad to the patient (one-hand adjustment)

  • Position or remove the foot tray as needed

  • Clear the transfer path

  • Explain the process and encourage the patient to use the hand grips

Standard Transfer Sequence

  1. Use the powered base to position the legs around the chair or wheelchair.

  2. Lock the brakes.

  3. Have the patient place their feet and knees correctly and hold the grips.

  4. Raise the patient smoothly into a standing or near-standing position.

  5. Complete the transfer (toilet, chair, bed edge, etc.).

  6. Lower the patient slowly.

  7. Unlock the brakes and move the lift away.

Restorative Standing

The removable foot tray supports supervised standing and short stepping practice.

Related Options

Need a Walkthrough?

Call 877-33-HOYER for guidance on your first Elevate transfers.

Previous Post Next Post

Related Posts

How to Use the Hoyer Calibre 850 Safely – Bariatric Transfer Guide

How to Use the Hoyer Calibre 850 Safely – Bariatric Transfer Guide

Higher-capacity lifts require careful technique and proper equipment. The Calibre’s powered legs and integrated scale support safer, more controlled bariatric transfers when used correctly. Preparation Checklist Fully charge the batteries Clear a wide path (bariatric transfers need more space) Select a properly sized bariatric-compatible sling Communicate each step clearly Lock the rear casters before lifting Standard Transfer Sequence Use the powered leg adjustment to open the base around the chair, bed, or wheelchair. Lock the brakes. Apply and secure the appropriate sling. Attach the sling to the 6-point cradle. Raise the patient slowly with the hand control. If needed, use the integrated scale to record weight. Move carefully to the destination surface. Lower the patient and remove the sling once secure. Unlock the brakes and reposition the lift. Scale Use During Transfers The integrated digital scale allows weighing without transferring the patient to a separate scale. Follow the on-unit controls for zeroing and reading the dual-sided display. Related Equipment Standard capacity alternatives → Hoyer Presence Pro 500 or Hoyer Stature Portable option → Hoyer Advance-E 340 Sit-to-stand needs → Hoyer Journey or Hoyer Up Full-support sling option → Hoyer Full Body Hammock Loop Style Sling First-Time Support Call 877-33-HOYER if you would like a guided walkthrough of your first Calibre transfers.

Read more
Best Slings & Cradle for the Hoyer HPL700 Bariatric Lift

Best Slings & Cradle for the Hoyer HPL700 Bariatric Lift

The HPL450 comes standard with a 6-point spreader bar designed for Hoyer loop-style slings. Recommended Slings General everyday transfers Hoyer Full Back Padded Loop Sling Extended support or floor recovery Hoyer Full Body Hammock Loop Style Sling Toileting / access Hoyer Access Padded Sling Sizing Guidance Match the sling to the patient’s measurements and weight. When unsure, send us the patient’s height, weight, and primary transfer type for a recommendation. Related Lifts Portable folding option → Hoyer Advance-E 340 400 lb electric → Hoyer HPL402 Manual hydraulic → Hoyer HML400 Higher capacity professional → Hoyer Presence Pro 500 Need Help Choosing? Email support@myhoyerlift.com or call 877-33-HOYER with patient details.

Read more
How to Use the Hoyer HPL700 Safely – Bariatric Transfer Guide

How to Use the Hoyer HPL700 Safely – Bariatric Transfer Guide

The HPL700 is a full-body electric lift designed for heavier patients. Proper technique and a wide, stable base are essential for safe transfers. Preparation Checklist Ensure a charged battery pack is installed Clear a wide path (bariatric transfers need more space) Select a properly rated bariatric or heavy-duty loop-style sling Use the hand control to open the powered base Lock the rear casters Communicate each step clearly with the patient and any assisting caregivers Standard Transfer Sequence Open the powered base and position the legs around the chair, bed, or wheelchair. Lock the brakes. Apply and secure the sling, then attach it to the 6-point bariatric cradle. Raise the patient smoothly with the hand control. Move carefully to the destination surface. Lower the patient in a controlled manner. Remove the sling, unlock the brakes, and reposition the lift. Powered Base Advantage Electric leg adjustment eliminates the need to manually push or pull heavy base legs under load, reducing caregiver strain during high-weight transfers. Related Options Higher capacity with scale → Hoyer Calibre 850 lb Bariatric Lift 500 lb professional → Hoyer Presence Pro 500 or Hoyer Stature Mid-range electric → Hoyer HPL450 Full-support sling option → Hoyer Full Body Hammock Loop Style Sling Need a Walkthrough? Call 877-33-HOYER for guidance on your first transfers with the HPL700.

Read more
Customer Service

Customer Service

9am - 6pm PST

Get in Touch

Get in Touch

877 33 HOYER

877-334-6937

Email

Email

support@myhoyerlift.com